|
Modular system with a cylindrical section, constructed from AISI 316L (L50050) stainless steel, with a metal thickness of 5/10 and a mirror-polished external finish. The laser welding is longitudinal. The ALA INOX MP system is suitable for fume extraction both with the use of the gasket, at a temperature ≤ 200°C (T200) under positive pressure (P1), and without the application of the gasket up to 600°C (T600) under negative pressure (N1). The ALA INOX MP system can be used to convey combustion products from appliances powered by diesel, methane gas, LPG, wood, fuel oils and biofuels in general. It can be installed on all heat generators, including condensing ones. Each element features a male-female connection with a special seat for the insertion of the special heat-resistant, triple-lip silicone seal (included up to a diameter of 160 mm).
The ALA INOX MP system has successfully passed the V2 corrosion resistance test. Total thickness: 0.5 mm.
ELEMENTS IN AISI 316L BA MIRROR POLISHED STAINLESS STEEL, SINGLE WALL
Pleated elbow
90° perfectly sealed inclined elbow, realized through the manufacturing of one single tubular pipe section. It cannot be used as drain duct for forced-draft units.
The gasket is included with every item until Ø 160 mm.
 |
 |
A | B |  |
|---|---|---|---|---|
| J 60 200 150 200 | 80 | 125 | 153 | 6 |
| J 60 200 250 200 | 100 | 127 | 174 | 6 |
| J 60 200 300 200 | 110 ▪ | 134 | 183 | 6 |
| J 60 200 350 200 | 120 | 140 | 190 | 6 |
| J 60 200 400 200 | 130 | 162 | 210 | 6 |
| J 60 200 450 200 | 140 | 170 | 213 | 6 |
| J 60 200 500 200 | 150 | 184 | 225 | 6 |
| J 60 200 550 200 | 160 | 193 | 236 | 4 |
| J 60 200 650 200 | 180 | 214 | 257 | 4 |
| J 60 200 750 200 | 200 | 232 | 285 | 4 |
